SPEC Pak® 3 Position Mini Wire Sealing Grommet Tan, Standard
Product Description
- APP® SPEC Pak® Mini 3 position connector is a small, IP68 sealed interconnect solution that provides up to 3 contacts and is UL rated to carry up to 22 amps per contact at 600 volts. This connector is ideal for applications requiring power or power and signal combined in a compact environmentally sealed (IP68) package. Contacts are available for wires ranging from 24 AWG to 14 AWG. Contacts are 30µ gold plated to provide low resistance and up to 500 mating cycles. The male contacts are also available in 3 lengths to enable sequencing as required. The connectors meet the UL1977 Sec 10.2 touch safe requirements and have an integral latch to prevent accidental un-mating. The SPEC Pak® Mini 3 connectors are manufactured of durable polycarbonate material and meet UL94 V-0 flame resistance requirements.Wire Sealing Grommets (Required for IP68 Sealing)
- NOTE: 1. For IP68 sealing of custom configurations, order 1 wire seal for every 1 pin and/or socket contact that is ordered. 2. Maximum wire OD not to exceed 2.7 mm (0.105”)
SKU
114916P3
- APP® SPEC Pak® Mini 3 position connector is a small, IP68 sealed interconnect solution that provides up to 3 contacts and is UL rated to carry up to 22 amps per contact at 600 volts. This connector is ideal for applications requiring power or power and signal combined in a compact environmentally sealed (IP68) package. Contacts are available for wires ranging from 24 AWG to 14 AWG. Contacts are 30µ gold plated to provide low resistance and up to 500 mating cycles. The male contacts are also available in 3 lengths to enable sequencing as required. The connectors meet the UL1977 Sec 10.2 touch safe requirements and have an integral latch to prevent accidental un-mating. The SPEC Pak® Mini 3 connectors are manufactured of durable polycarbonate material and meet UL94 V-0 flame resistance requirements.Wire Sealing Grommets (Required for IP68 Sealing)
- NOTE: 1. For IP68 sealing of custom configurations, order 1 wire seal for every 1 pin and/or socket contact that is ordered. 2. Maximum wire OD not to exceed 2.7 mm (0.105”)
