2005G4 | Saf-D-Grid® 400 Receptacle Housing

Product Description

Saf-D-Grid® 400 Short Mount Receptacle Housing with snap-in panel mount for 1.6mm panel thickness.
Mid-flange snap-in panel mount design shortens space required inside the panel. For use with crimp wire contacts.
First Mate, Last Break ground contact provides the safety of an earthing path before engagement of the power contacts.
The connectors are rated for current interruption for both electronic (capacitive) and electrical (resistive) loads.
Passes UL & IEC finger probe (plug & receptacle) and 3mm probe tests (receptacle). Minimizes the risk of personal contact with a hazardous voltage.
Housings contain the arc if connectors are mated or unmated while under load minimizing risk to personnel.
Anderson Power Products®® has lead the connector industry in development of DC power connection solutions since the introduction of the SB® electrical connector in 1953. Saf-D-Grid® builds on the proven contact technology used in SB® and Powerpole® connectors by offering features required in 380-400VDC power distribution systems.
APP® introduced the Saf-D-Grid® connector system in January 2009 as a safe appliance power connector for server, telecommunication, and other devices up to 600 VDC.
The APP® Saf-D-Grid® plug and receptacle provide for thedirect connection of DC electronic devices to a DC micro-gridpowered by renewable energy or high efficiency DC sources.The connector meets international safety requirements for hazardous, low voltage applications including UL 950 and IEC60950. The Saf-D-Grid® is size compatible with the IEC 320C13 and C14 AC connection system. It is the only connector system so sized that is UL rated for disconnect of a 400 VDC,20 amp load.
Saf-D-Grid® also enables greater power density by allowing up to 40A and 600V DC or AC within the same space of the IEC320 C13 & C14 system that is limited to 10A and 250 VAC.This allows the use of Saf-D-Grid® in AC systems that require more power by increasing the wattage capability within the existing connector space.

SKU

2005G4

Saf-D-Grid® 400 Short Depth Receptacle Housing 1.6mm

Add Your Review Be the first to review this product

You're reviewing 2005G4 | Saf-D-Grid® 400 Receptacle Housing

Required fields are followed by *.

Nickname Summary Review

Specifications

ELECTRICAL
Voltage (AC/DC)
• UL 1977 / CSA 22.2	600
• IEC	400

Current Rating (Amperes)	40

Wire Range (AWG)	#12 to #18
(mm²)	2.5 to 0.75

Hot Plug Rated
• 250 cycles	400V @ 440A in-rush
• 250 cycles (UL)	400V @ 20A load

Dielectric Withstanding Voltage	3,300

Operating Temperature (°C)	-20° to 80°
(°F)	-4° to 176°

Fault Current Withstand
UL 467	14 AWG, 300A, 4 Sec.

MECHANICAL
Contact Retention (lbf)	20
(N)	89

Plug Latch Retention (lbf)	20
(N)	89

Panel Latch Retention (lbf)	60
(N)	267

Durability	5,000 cycles - no load

Receptacle Max Wire OD (in)	0.22
(mm)	5.6

Creep & Clearance per UL & IEC 60950
Between live parts of different polarity,
e arthing circuit and the mating surface.
• Short and Flush Receptacle
with Crimp Contacts	8.0 mm

• Ultra Short Receptacle, Short	7.0 mm
and Flush Receptacle with Solder
or PCB Contacts

Maximum PCB Thickness ^A (in)	0.093
(mm)	2.4

Mechanical Shock ^B
IEC 60512-4-6C	50g’s

Vibration, High Frequency ^B
IEC 60512-4-6d	20g’s

PROTECTION
Touch Safety with Connector Housing
IEC 60529	IP20

MATERIALS
Housing
• 2006G1 Series Receptacles	Hi Temp Nylon + 30% GF, UL94 V-0, Halogen Free
• All other Receptacles & Plugs	Polycarbonate UL94 V-0

Springs	Stainless Steel

Contacts	Copper, Silver Plate

Cable / Strain Relief	Thermoplastic UL94 V-2

A - Applicable only to receptacles intended for termination to PCB
B - Tested with straight plug and flush mount receptacle with #14 AWG wire and 2003G1
contacts.