Powerpole® PP75 Standard Housings, Blue

SKU

5916-BK

Powerpole® Connector Standard Housing, Blue , PP75 up to 120 Amps

The second smallest Powerpole® housing can be used with wire contacts up to 6 AWG [10mm²] as well as PCB and busbar contacts.
PP75 series Powerpole® housings can be used for wire-to-wire, wire-to-board, and wire-to-busbar applications.
Wire sizes from #16 AWG (1.3 mm²) to #6 (13.3 mm²) offer power capabilities up to 120 amps per pole.
Locking housings offer the capability to secure Powerpole® housings to each other and to mounting pads. Housings made from chemical resistant (CR) resin withstand industrial solvents better than standard housings.
Large Wire Range Accommodates up to #6 (10mm²) Wire Reducing bushings allow as small as #16 (1.5 mm²) wire to be used
Wire, PCB, and Busbar Contacts
Allows one connection system to meet multiple needs
Mini-Powerclaw PCB Contacts Minimize PCB Footprint
Removes the PP75 housing from the board side

您正在审查 Powerpole® PP75 Standard Housings, Blue

必填字段后有 *.

昵称总结评论

ELECTRICAL
UL Current Rating (Amperes)*	10*

UL Voltage Ratings (Volts)**	600*

AVG Contact Resistance*	2,200
(micro-ohms)

Insulation Withstanding	2,200
Test Voltage (Volts AC/DC)

MECHANICAL
Contact Barrel Wire Size (AWG)	#14 to #16
(mm²)	2.1 to 1.3

Maximum Wire Insulation Diameter (inches)	0.137
(mm)	3.48

Operating Temperature Range °C***	-20° to 105°
°F	-4° to 221°

Contact Retention Force (lbf)	25

No load (Contact/Disconnect Cycles)	To 250

Avg. Connection/Disconnect (lbf)	5

MATERIALS
Flammability Rating of Housing Material	UL94 V-0

* UL Rated for 65°C largest wire or cable size
** Both AC & DC Voltage
*** Contact factory for higher temperature rated connectors